Supertrak Machines


Supertrak Power Packs


Supertrak Custom Solutions


Huddig Equipment


Biobaler Equipment


Used Equipment

Phone:

(800) 446-9858
(941) 505-7800
(941) 505-2308 FAX


Address:

26855 Airport Road
Punta Gorda, FL 33982

Huddig — 1260C

Power

  • Engine: Cummins turbocharged diesel engine
  • Model: QSB 6,7 stage III
  • Power output: 116kW (152 hk) vid 1900 rpm
  • Type: Straight 6-cylinder water cooled
  • Cylinder volume: 6,7 l
  • Torque: 662 Nm vid 1100 rpm

Transmission

  • Hydrostatic. Gearbox with 2 gears.
  • Speeds 1st 0-10 km/h low ratio.
  • Speeds 2nd 0-42 km/h high ratio.
  • The transmission system is separated from the operating hydraulics.

Axles

  • ZF
  • Automatic differential brake with planetary hub reduction gears.

Wheels

  • Standard, front and rear 520/70x34.

Brake system

  • Transport brakes: Servo assisted disc brakes.
  • Parking brake: Spring applied disc brake.
  • Service brake: Automatic engagement of transport brake when stationary. (Automatic function can be disengaged.)

Steering system

  • Hydrostatic orbitrol control system with dual cylinders in the center pivot.
  • Steering angle ±32°
  • Frame oscillation ±8°

Electrical system

  • Voltage: 24V
  • Batteries: 2x12V, 110Ah
  • Generator output: 70A alternating current
  • Starter motor output : 5,8 kW

Hydraulic system

  • Load sensing hydraulic with variable axial piston pumps, 60cc+ 100cc (connected to stepped-up pump distribution box provides a total 174cc). The hydraulic system is prepared for Huddig approved environmentally compatible hydraulic oils.
  • Operating pressure: 23,3 MPa (233 bar)
  • Nominal max flow at 1 000 rpm: 176 l/min
  • Nominal max flow at 1 500 rpm: 264 l/min
  • Nominal max flow at 2 000 rpm: 352 l/min

Weight (incl buckets):

  • 12 850 kg.

Volumes

dm3 (l)

  • Oil engine: 15
  • Cooling system: 20
  • Fuel system: 160
  • Hydraulic oil tank: 185
  • Hydraulic system total: 340
  • Hydraulic system total: 30
  • Hydrostatic tank: 20
  • Gearbox: 3
  • Front and rear axles:
  • Differential och hub reduction: 24

Parallel linkage loader

  • Maximum lifting force: 61.5 kN (6150 kp)
  • Max breaking force at bucket edge: 60 kN (6000 kp)
  • Recommended bucket volume, soil: 1-1,4 m3
  • Recommended bucket volume, light materials: 2-2,5 m3

Backhoe

  • Breakout force at bucket edge: 103 kN (10300 kp)
  • Digging force at bucket pivot: 63 kN (6300 kp)
  • Lifting force at max reach without bucket: 19,1 kN (1910 kp)
  • Maximum slewing torque: 3700 kpm
  • Recommended bucket volume approx.: 350-450 l

Cab

  • Tilting cab
  • Tinted glass
  • Large opening sunroof
  • Driver’s seat with safety belt
  • Opening side windows
  • Folding passenger seat with safety belt
  • Prepared space under driver’s seat for voltage transformer etc.
  • Windscreen washers and wipers with intermittent front and rear
  • Storage space
  • Rear view mirrors 2 interior and 2 exterior folding
  • Moulded floor mat
  • Sun visors front and rear
  • Fire extinguisher 6 kg
  • Adjustable steering wheel

Gauges

  • Speedometer
  • Other gauges integrated in display

Central warning

The electronic control system alarms using flashing lamps and buzzers and shows text messages in the display.

Lighting

  • Work lamps front x 2 (halogen)
  • Work lamps rear x 2 (halogen)
  • Rotating warning lamp with pivoted mounting
  • Automatic interior lighting
  • Automatic reversing lamp

Brake system

  • Dual circuit brake system
  • Electrically operated parking brake
  • Automatic service brake (can be disengaged)

Backhoe

  • Electric servo operated
  • Hydraulic tool mounting
  • Hose rupture protection valve

Load unit

  • Electric servo opereated
  • Prepared for 3rd hydraulic function
  • Safety bar

Other

  • Double command
  • 12v and 24v power outlet
  • Automatic main circuit breaker
  • Toolkit
  • Engine heater
  • Heating system for hydraulic oil
  • Lockable toolbox on left hand front wing
  • Hose rupture protection valve on support legs
  • Belly plates front and rear
  • Safety start for the engine
  • Electronic control system with 4 adjustable operating settings
  • Foot operated electric inch pedal

Buckets

  • Digging bucket G-85 with Kverneland teeth, 420 l
  • Front bucket 2,50 m, volume 1450 l with scraper edge in rear face

Backhoe

  • Quick hitch for 50 mm pins
  • Oil-Quick
  • Hydraulic output, double action Grab John type
  • Hydraulic motor output, handheld tool type
  • Hydraulic motor output, brusch cutter type etc
  • Pipe kits for boom for hydraulic motor output
  • Hydraulic output for rototilt
  • Hydraulic output for rototilt at Oil-Quick
  • Double float position
  • Hydraulic output for cable feeder
  • Hydrauluttag för kabelmatare
  • Pipe kit extra hydraulic quick coupling
  • Piston rod protection for bucket cylinder

Backhoe Tools

  • Digging buckets
  • Cable buckets
  • Slope buckets
  • Grid buckets
  • Pusher buckets
  • Grading cutters
  • Asphalt cutter
  • Ground frost hook
  • Crane arm 2 m

Loader

  • Tool lock including 3rd hydraulic function
  • 3rd hydraulic function
  • 3rd function continuous
  • Float position
  • Load suspension

Loader Tools

  • Front buckets
  • Grading buckets
  • Snow buckets

Cab

  • Tilting rear windscreen
  • Automatic climate control
  • Drivers’s seat, air sprung
  • CD-player with radio + 2 speakers
  • Cab heater output
  • Work lamps, 6 x extra
  • Extra rotating warning lamp
  • Head restraint
  • Sun visors side windows x 2
  • Heated rear view mirrors
  • Output lunchbox heater
  • Extension kit to elevate the cab 100 mm

Other

  • Several colour options
  • Several tyre options
  • Environmental friendly oil, operating hydraulics
  • Thicker belly plates
  • Central lubrication, prepared
  • 7-pin towing connection
  • Tow hitch including pin
  • Tow hitch for cable ploughing mounted on outrigger support leg
  • Protective plates at pivot
  • Diesel heater cab and engine (7 day timer)
  • Fuel filling pump, electric
  • Generator 100 A
  • Lockable toolbox, on right hand front wing
  • Cruise Control
  • Air Sentry
  • Triple R
  • Bracket for lift
  • Huddig Lift
  • Remote Control
  • Railway equipment
  • Safety equipment

Specifications with standard buckets and 520/70x34 wheel fittings

  • A - Transport length: 8630 mm
  • B - Wheelbase: 2600 mm
  • C - Backhoe overhang: 1100 mm
  • D - Height above cab: 3110 mm
  • E - Transport height backhoe: 4380 mm
  • F - Transport length backhoe: 2300 mm
  • G - Ground clearance: 515 mm
  • H - Ground clearance angle, outrigger support legs: 32°
  • I - Maximum width outrigger support legs: 3700 mm
  • ….Width outrigger support legs, parked position: 2460 mm
  • J - Width front bucket: 2500 mm
  • K - Width over wheels: 2470 mm
  • r1- Swing radius outside bucket: 6288 mm
  • r2- Swing radius outside wheels: 5760 mm

Back

  • L - Reach: 6530 mm
  • M - Depth: 4900 mm
  • N - Load height: 3770 mm
  • O - Digging width: 4200 mm

Front loader

  • P - Reach: 2630 mm
  • Q - Lift height leveled bucket: 3500 mm
  • R - Load height 45° tilted bucket: 2690 mm
  • S - Reach 45° tilt angle: 1030 mm
  • T - Max. tilt angle: 63°
  • U - Load angle: 40°
  • U1- Load angle in carrying position: 46°
  • V - Tilt angle ground plane: 112°
  • X - Excavation depth: 90 mm